Sean-NTN Driveshaft CORP.

JAPAN NSK Bearing

NSK japan roller bearing company. NSK japan roller bearing company is widely used in the rolling parts of motors, internal combustion engines, generators, gearboxes, rolling mills, vibrating screens, rotating parts of the crane.The cylindrical roller bearing not only support the smooth and quiet rotation but also play an important to bear the load.

NSK bearings run in wind turbines and machine tools, our linear technology can be found on production lines for a variety of industries, and our automotive components are installed in vehicles from practically all renowned automotive manufacturers.NSK is a global manufacturer of ball and roller bearings, linear motion technology, automotive components and steering systems with both domestic and overseas manufacturing capabilities.

55 mm x 120 mm x 43 mm NSK HR32311J JAPAN Bearing 65X140X51: L1 : 65 mm; Weight : 3.52 kg

NSK HR32311 J JAPAN Bearing: s1 : 24.25 mm; Dz : 60 mm

50 mm x 110 mm x 40 mm NSK HR32310J JAPAN Bearing 55*120*45.5: da min : 60 mm; d : 55 mm

45 mm x 100 mm x 36 mm NSK HR32309J JAPAN Bearing 50*110*40: Recommended tightening torque for set screw : 8 Nm; N : 17mm

40 mm x 90 mm x 33 mm NSK HR32308J JAPAN Bearing 45*100*38.25: Characteristic rolling element frequency, BSF : 5.9 Hz; Nlim (grease) : 4,500 rpm

35 mm x 80 mm x 31 mm NSK HR32307J JAPAN Bearing 40×90×35.25: Designation of bearing : ES206-18G2T20; A5 : 14.8 mm

30 mm x 72 mm x 27 mm NSK HR32306J JAPAN Bearing 35x80x32.75: Min operating temperature, Tmin : -40 °C; EAN : 4547359534009

NSK HR32248J JAPAN Bearing 30*72*28.75: A : 38 mm; L1 : 42 mm

NSK HR32238 J JAPAN Bearing 240*440*127: End Cap Groove : Yes; Brand : Baldor-Dodge

150 mm x 270 mm x 73 mm NSK HR32230J JAPAN Bearing 190*340*97: Z : 41.3 mm; T max. : 200 °C

NSK HR-322-22-C JAPAN Bearing 150*270*77: L : 134 mm; Recommended tightening torque for set screw : 22 Nm

105 mm x 190 mm x 50 mm NSK HR32221J JAPAN Bearing 22x50x19.25: T max. : 100 °C; Recommended tightening torque for set screw : 8 Nm