Sean-NTN Driveshaft CORP.

JAPAN NSK Bearing

NSK japan roller bearing company. NSK japan roller bearing company is widely used in the rolling parts of motors, internal combustion engines, generators, gearboxes, rolling mills, vibrating screens, rotating parts of the crane.The cylindrical roller bearing not only support the smooth and quiet rotation but also play an important to bear the load.

NSK bearings run in wind turbines and machine tools, our linear technology can be found on production lines for a variety of industries, and our automotive components are installed in vehicles from practically all renowned automotive manufacturers.NSK is a global manufacturer of ball and roller bearings, linear motion technology, automotive components and steering systems with both domestic and overseas manufacturing capabilities.

280 mm x 380 mm x 63,5 mm NSK HR32956J JAPAN Bearing 70x110x31: A : 67 mm; L1 : 65 mm

180 mm x 250 mm x 45 mm NSK HR32936J JAPAN Bearing: Da max : 187 mm; B : 45 mm

140 mm x 190 mm x 32 mm NSK HR32928J JAPAN Bearing 180×250×45: J : 160 mm; d : 45 mm

100 mm x 140 mm x 25 mm NSK HR32920J JAPAN Bearing 140x190x32: C0 : 7.88 kN; G : M6x1

85 mm x 120 mm x 23 mm NSK HR32917J JAPAN Bearing 100×140×25: Designation of bearing : UK208G2H; L1 : 32 mm

70 mm x 100 mm x 20 mm NSK HR32914J JAPAN Bearing: Dynamic load, C : 226 kN; D1 : 107 mm

35 mm x 55 mm x 14 mm NSK HR32907J JAPAN Bearing 70*100*20: Recommended tightening torque for set screw : 8 Nm; L : 113 mm

30 mm x 47 mm x 12 mm NSK HR32906J JAPAN Bearing 35 55 14: L1 : 137 mm; H : 167 mm

80 mm x 170 mm x 58 mm NSK HR32316J JAPAN Bearing 30*47*12: A2 : 75.8 mm; B : 61.8 mm

NSK HR32316C3 JAPAN Bearing 80*170*61.5: Min operating temperature, Tmin : -25 °C; Fatigue limit load, Cu : 0.52 kN

70 mm x 150 mm x 51 mm NSK HR32314J JAPAN Bearing 80*170*61.5: Dz : 54 mm; d : 12 mm

NSK HR32313 J JAPAN Bearing 70*150*51: s1 : 21.45 mm; A : 34 mm