NSK 40tac72csuhpn7c Bearing

JAPAN NSK Bearing

NSK japan roller bearing company. NSK japan roller bearing company is widely used in the rolling parts of motors, internal combustion engines, generators, gearboxes, rolling mills, vibrating screens, rotating parts of the crane.The cylindrical roller bearing not only support the smooth and quiet rotation but also play an important to bear the load.

NSK bearings run in wind turbines and machine tools, our linear technology can be found on production lines for a variety of industries, and our automotive components are installed in vehicles from practically all renowned automotive manufacturers.NSK is a global manufacturer of ball and roller bearings, linear motion technology, automotive components and steering systems with both domestic and overseas manufacturing capabilities.

280 mm x 420 mm x 87 mm NSK HR32056XJ JAPAN Bearing 25×52×19.25

280 mm x 420 mm x 87 mm NSK HR32056XJ JAPAN Bearing 25×52×19.25: N1 : 17 mm; H1 : 12.8 mm

260 mm x 400 mm x 87 mm NSK HR32052XJ JAPAN Bearing 280*420*87

260 mm x 400 mm x 87 mm NSK HR32052XJ JAPAN Bearing 280*420*87: C0 : 44.8 kN; d1 : 83 mm

220 mm x 340 mm x 76 mm NSK HR32044XJ JAPAN Bearing 260*400*87

220 mm x 340 mm x 76 mm NSK HR32044XJ JAPAN Bearing 260*400*87: Ring Size : Standard; Bearing Insert Material : Steel

170 mm x 260 mm x 57 mm NSK HR32034XJ JAPAN Bearing 220×340×76

170 mm x 260 mm x 57 mm NSK HR32034XJ JAPAN Bearing 220×340×76: Characteristic rolling element frequency, BSF : 7.31 Hz; Fatigue limit load, Cu : 106 kN

160 mm x 240 mm x 51 mm NSK HR32032XJ JAPAN Bearing 170*260*57

160 mm x 240 mm x 51 mm NSK HR32032XJ JAPAN Bearing 170*260*57: Setscrew Angle : 65; Bearing Locking Device : Setscrew

150 mm x 225 mm x 48 mm NSK HR32030XJ JAPAN Bearing 160*240*51

150 mm x 225 mm x 48 mm NSK HR32030XJ JAPAN Bearing 160*240*51: Minimum Buy Quantity : N/A; Radial clearance class : C3

140 mm x 210 mm x 45 mm NSK HR32028XJ JAPAN Bearing 150X225X48

140 mm x 210 mm x 45 mm NSK HR32028XJ JAPAN Bearing 150X225X48: J : 129 mm; Recommended tightening torque for set screw : 8 Nm

130 mm x 200 mm x 45 mm NSK HR32026XJ JAPAN Bearing

130 mm x 200 mm x 45 mm NSK HR32026XJ JAPAN Bearing: Nlim (grease) : 11,000 rpm; D : 62 mm

NSK HR32026 J JAPAN Bearing: B : 34 mm; Z : 63.4 mm

120 mm x 180 mm x 38 mm NSK HR32024XJ JAPAN Bearing 130*200*45

120 mm x 180 mm x 38 mm NSK HR32024XJ JAPAN Bearing 130*200*45: G : M10x1; Designation of housing : T319-

100 mm x 150 mm x 32 mm NSK HR32020XJ JAPAN Bearing 120×180×38

100 mm x 150 mm x 32 mm NSK HR32020XJ JAPAN Bearing 120×180×38: d : 15 mm; H2 : 65 mm

90 mm x 140 mm x 32 mm NSK HR32018XJ JAPAN Bearing 100*150*32

90 mm x 140 mm x 32 mm NSK HR32018XJ JAPAN Bearing 100*150*32: B : 61 mm; T max. : 100 °C