Sean-NTN Driveshaft CORP.

JAPAN SKF Bearing

SKF bearing units are ready to mount and use, giving you quick and easy installation. They can also be pregreased and sealed to limit maintenance and provide a long service life. What’s more, they can compensate for static shaft misalignment to increase reliability.SKF BAH-0013D bearing is mainly used for high-speed rotating scenes with high load, high precision, high speed and low temperature. Vibration, should prevent moisture, dirt intrusion, regular maintenance can extend the life cycle.

Rolling bearings support and guide rotating or oscillating machine elements – such as shafts, axles or wheels – and transfer loads between machine components. They provide high precision and low friction and therefore enable high rotational speeds while reducing noise, heat, energy consumption and wear.

70 mm x 150 mm x 35 mm SKF 7314 BECBM JAPAN Bearing 70*150*35: Insert Bearing IB : Stainless Steel; Basic Static Radial Load Rating Co : 6550 N

70 mm x 150 mm x 35 mm SKF 7314 BECBM JAPAN Bearing 70*150*35: D : 180mm; Availability: : In Stock

70 mm x 150 mm x 35 mm SKF 7314 BECBJ JAPAN Bearing 70*150*35: Static Load Rating (kN): : 51100; Oil Limiting Speed (r/min): : 6000

SKF 7314 BECBEP JAPAN Bearing: Basic Static Radial Load Rating Co : 720000 N; Fillet Radius rb : 1.50 mm

SKF 7314 BEAGY JAPAN Bearing 70*150*70: Dynamic Load Rating (kN): : 13.4; Limiting Speed Rating (r/min): : 18000

SKF 7314 B JAPAN Bearing 70*150*35: Basic Static Radial Load Rating Co : 108000 N; B : 61.90 mm

SKF 7314 A JAPAN Bearing 70*150*35: Seals or Shields: : Open Type; Cage Type: : Steel

SKF 7314 BECBM JAPAN Bearing 70*150*35: Static Load Rating (kN): : 150; Seals or Shields: : Open Type

SKF 7313M JAPAN Bearing: C : 47.625 mm; α : 6 °

SKF 7313-DBD.C3 JAPAN Bearing 65*140*33: Limiting speed : 2000 r/min; r3,4 min. : 4 mm

SKF 7313BOB JAPAN Bearing 65×140×66: Cage Type: : Brass; D : 260mm

SKF 7313-B-JP JAPAN Bearing 65×140×33: r1,2 min. : 9.5 mm; b : 22.3 mm